Philippe it appears that you are suffering from the same problem that
Hereward was.
See if you can' t move your NIC to a different slot. If that doesn't work
see if you can't remove something (if you have a extra card in there you
don't need or can do without for a minute or two.)
Check to see if you can move jumper settings on the NIC and or a video card
(other periphial card)
The problem is that you have an IRQ or memory conflict in there somewhere
Good luck
-----Original Message-----
From: Philippe Brian�on [mailto:[EMAIL PROTECTED]]
Sent: Monday, September 24, 2001 2:38 PM
To: [EMAIL PROTECTED]
Subject: [Ltsp-discuss] logging problem
I' have problem I can't resolv with LTSP.
I' got the IP adrress through DHCP and the kernel load just after.
But at the end of the transfert, I got a "neighbour table overflow".
I can't resolv this.
Is there anybody to help me !!
Thank's very much in advanced and excuse me for my poor english.
Philippe
--
--
Philippe BRIANCON - F1JRV
Email : [EMAIL PROTECTED]
5 all�e du croisic 31770 COLOMIERS
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
