Thanks Asif, finally my cirrus 5434 is working with
your modeline, but I need to disable the use of Xfonts
so I am having problems with some web pages (can 't
login to yahoo for example, get a core dump), but if I
enable xfonts I get the following error:
_FontTransSocketINETConnect: Can't connect: errno=111
failed to set default font path
'cp/192.168.0.253:7100'
My working lts.conf is:
[Default]
SERVER = 192.168.0.253
XSERVER = XF86_SVGA
X_MOUSE_PROTOCOL = "PS/2"
X_MOUSE_DEVICE = "/dev/psaux"
X_MOUSE_BUTTONS = 2
LOCAL_APPS = N
LOCAL_WM = N
UI_MODE = GUI
XkbModel = pc105
XkbLayout = es
USE_XFS = N
X_RES_1 = 800x600
X_COLOR_DEPTH = 8
X_MODE_800x600 = 40.00 800 840 968 1056 600 601 605
628
RUNLEVEL = 5
Also works if I set color depth to 16, but it is too
slow. How can I improve performance on this?
Thanks again,
Hugo
--- Asaf Maruf Ali <[EMAIL PROTECTED]> escribi�: >
> Hugo
>
> If you are using 2.09 use the following:
>
> Xserver= xf86_svga
> X_color_depth=8
> X_mode_0 = 800x600
> x_mode_800x600= 40 800 840 968 1056 600 601 605 628
>
>
> Please ignore the capital letter typos. Pls use
> capitals.
>
> Works for my cirrus logic GD5430 vga card
>
>
> Asaf
> ----- Original Message -----
> From: Prolinux <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Thursday, November 08, 2001 1:44 AM
> Subject: Re: [Ltsp-discuss] 2.09pre4+3c509+ RH7.2 or
> Mdk8.1
>
>
> > I am using KDM now, thanks, but it still don't
> work
> > with my cirrus logic video card, so I changed
> XServer
> > from auto to cirrus on lts.conf and set vertical
> and
> > horizontal parameters on it according with my
> monitor
> > but don't work, X starts but I can't see anything,
> > video is not syncronized ok. Any help with the
> correct
> > parameters for this card?
> >
> > My current lts.conf is:
> >
> > [Default]
> > SERVER = 192.168.0.254
> > XSERVER = cirrus
> > X_MOUSE_PROTOCOL = "PS/2"
> > X_MOUSE_DEVICE = "/dev/psaux"
> > X_MOUSE_RESOLUTION = 400
> > X_MOUSE_BUTTONS = 3
> > USE_XFS = N
> > LOCAL_APPS = N
> > RUNLEVEL = 5
> >
> > XkbModel = pc105
> > UI_MODE = GUI
> > XkbLayout = es
> > X_HORZSYNC = "31.5-48.4"
> > X_VERTSYNC = "43.5-75.0"
> > #X_MODE_0 = 640x480
> > #X_MODE_0 = 800x600 50 800 856 976 1040 600 637
> 643
> > 666 +hsync +vsync
> > #X_VIDEORAM = 1024
> > #X_COLOR_DEPTH = 8
> >
> > #X_RES_1 = 800x600
> >
> > I am using Syncmaster 4S for my terminals.
> >
> > Thanks,
> >
> > Hugo
> >
> > --- Venkat Manakkal <[EMAIL PROTECTED]>
> escribi�: >
> > Here it is folks... Hugo, sorry for the extra copy
> > > sent directly, I noticed
> > > that this list serv (this is my first post here)
> > > does not set the reply-to
> > > as the listserv address...
> > >
> > > -----
> > >
> > > Hello Hugo and others...
> > >
> > > I've just started using ltsp myself, and here
> are
> > > some hints:
> > >
> > > I've just got RH 7.2 working with the latest
> > > 2.09pre4 version of LTSP. The
> > > trick is to run kdm (or xdm) not gdm on the
> server.
> > > Ext3 is not an issue.
> > > To run kdm edit /etc/sysconfig/desktop and set
> > > DESKTOP="KDE". You have to
> > > then reboot the server (or init 3, init 5).
> There is
> > > something in the new
> > > gdm that even with a "correctly" configured
> gdm.conf
> > > file it refuses to
> > > authorize XDMCP sessions for other hosts. Anyone
> > > have success fixing gdm.conf?
> > >
> > > I also got 2.09pre4 to run with SuSE 7.2 as the
> > > server just create a link
> > > using "ln -s suse.sh suse-7.2.sh" in the
> lts_core
> > > and install as usual.
> > >
> > > I've also noticed that the latest version of X
> that
> > > ships with 2.09pre4
> > > does not fully support *older* video cards (i.e.
> non
> > > AGP) automagically.
> > > For those set run level to 3 in lts.conf for the
> > > workstation and then try
> > > getting the X server to run, or experiment with
> card
> > > specific servers and
> > > custom XF86configs.
> > >
> > > Best,
> > >
> > > ---Venkat.
> > >
> > >
> > >
> > >
> > > RH 7.2 works with
> > > At 07:54 PM 11/6/2001 -0600, you wrote:
> > > >I could not setup LTSP with new distributions
> like
> > > Red
> > > >Hat 7.2 or Mandrake 8.1 when used with 3c509
> based
> > > >terminals. It works OK when I use RH 7.1. Any
> help?
> > > >Could the problem be related with the use of
> ext3?
> > > >
> > > >Thanks,
> > > >
> > > >Hugo
> > >
> > >
> > >
> >
>
_____________________________________________________________________
> > > Ltsp-discuss mailing list. To un-subscribe, or
> > > change prefs, goto:
> > >
> > >
> >
>
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> > > For additional LTSP help, try #ltsp channel on
> > irc.openprojects.net
> >
> >
>
_________________________________________________________
> > Do You Yahoo!?
> > �Quieres armar tu pr�pia p�gina Web pero no sabes
> HTML?
> > Usa los asistentes de edici�n de Yahoo! Geocities
> > y tendr�s un sitio en s�lo unos minutos.
> > Vis�tanos en http://espanol.geocities.yahoo.com
> >
> >
>
_____________________________________________________________________
> > Ltsp-discuss mailing list. To un-subscribe, or
> change prefs, goto:
> >
>
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> > For additional LTSP help, try #ltsp channel on
> irc.openprojects.net
>
_________________________________________________________
Do You Yahoo!?
�Quieres armar tu pr�pia p�gina Web pero no sabes HTML?
Usa los asistentes de edici�n de Yahoo! Geocities
y tendr�s un sitio en s�lo unos minutos.
Vis�tanos en http://espanol.geocities.yahoo.com
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
