Hi, there are not option for starting in svga with the console 2 in dhcpd.conf. If the kernel don't look the display adapter in automatic, can't start the lpp's kernel. I have try with a P133 with ATI rage and not working; also with the normal kernel I must create a XF86Config appropriately.
regards giorgio Il mar, 30 ott 2001, scrivesti: > James, > > You also need the following lines for each workstation in your dhcpd.conf > file in order for the lpp screen to display: > > option option-128 e4:45:74:68:00:00; > option option-129 "vga=0x301 console=/dev/tty2"; > > Hope this helps, > > Erick > > On Tuesday 30 October 2001 05:26 pm, James Newlin wrote: > > When we added "option log-servers" in the dhcpd.conf the workstation > > continued to boot up. > > > > ----- Original Message ----- > > From: "James Newlin" <[EMAIL PROTECTED]> > > To: "LTSP Discuss Group" <[EMAIL PROTECTED]> > > Sent: Tuesday, October 30, 2001 3:32 PM > > Subject: 2.09pre4 > > > > > We are sorry if this has already been addressed and answered... We > > > have installed 2.09pre4. Install appeared to be perfect. We are > > > using > > > > RedHat > > > > > 7.0 distro. Workstation boots but stops at the NFS mount saying > > > > "nfsmount > > > > > failed: bad file number" and "NFS: mount program didn't pass remote > > > address!". We must be missing something. Any ideas? We have > > > NFS running and exports shows the correct path names and IP addresses. > > > We > > > > are > > > > > using ISC dhcp 3.0rc12. Our dhcpd.conf has the option root-path > > > > statement > > > > > using "192.168.1.1:/opt/ltsp/i386". Also when we use the lpp kernel, > > > it asks us for a video mode? Any video mode we choose, does not bring > > > up > > > > the > > > > > pretty "LTSP booting" screen. Do we send something in the dhcpd.conf > > > > file > > > > > to set the video mode? > > > > > > Thanks for your time, > > > > > > James > > > > _____________________________________________________________________ > > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > > For additional LTSP help, try #ltsp channel on irc.openprojects.net -- Giorgio Rossi Tech. - Dept. Brazzoli S.p.A. _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
