this would mean that the card hasnt been assigned an IRQ or IO address. I'd look in the bios and see if you can assign IRQ's to specific PCI slots and if that doesnt work turn of PNP OS = yes to NO and manually assign the resources rather than automatic assignment
if this still doesnt work try removing other hardware except the video card obviously heh...... ----- Original Message ----- From: "Denzil L. Kelly" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, October 13, 2001 4:40 PM Subject: [Ltsp-discuss] ws works at 10 mbps, but not 100 mbps > The 10 mbps 3com isa card works well. I've not bee able to get the 3com > 3c905b-tx 100 mbps pci card to work on my workstation. The workstation > hangs with the following message: > > Seaching for server(DHCP) > ..... > > Another interesting message I while the workstation is attempting to > booting is this: > > Probing...[3c905] > The PCI BIOS has not enabled this device! > Updating PCI command 0113->0117. pci_bus 00 pci_device_fn 38 > > Does anyone know what this might mean? > The workstation is a 75 mhz dell optiplex xl 575. > > > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
