No, I think the permissions are set correctly. I just installed the Mach64 Xserver package on the server...I keep forgetting that I'm setting up X for the *client*, not the server. The server already runs KDE just fine...it was installed when I installed RH7.1
-Carl -----Original Message----- From: ext Clovis Sena [mailto:[EMAIL PROTECTED]] Sent: Wednesday, October 17, 2001 1:32 PM To: Waldron Carl (EXT-NET/Petaluma) Cc: 'ext Jim McQuillan'; [EMAIL PROTECTED] Subject: RE: [Ltsp-discuss] Connection refused problem? the mouse trouble?? or maybe the xserver permissions?? had you wait till it stops and give you error messages??? At 11:41 17/10/01 -0700, Waldron Carl (EXT-NET/Petaluma) wrote: >Setting the runlevel to 5 in lts.conf worked (thanks!), X now seems to >be starting...but the login screen never appears. Back to Google... > >-Carl > >-----Original Message----- >From: ext Jim McQuillan [mailto:[EMAIL PROTECTED]] >Sent: Wednesday, October 17, 2001 11:28 AM >To: Waldron Carl (EXT-NET/Petaluma) >Cc: [EMAIL PROTECTED] >Subject: Re: [Ltsp-discuss] Connection refused problem? > > >Carl, > >The fact that you are getting 'Press <enter> blah blah blah' indicates >that you have the workstation setup for runlevel 4. That should give >you a telnet login to the >server. > >But, you may not have telnetd setup on the server, or you may have it >blocked with tcpwrappers or iptables/ipchains. > >Are you sure you want a character mode login ? Most people use X >windows. For that, you would set your RUNLEVEL = 5 in the lts.conf >file. > >Hope that helps, > >Jim McQuillan >[EMAIL PROTECTED] > > >Waldron Carl (EXT-NET/Petaluma) wrote: > > > Hi all, > > > > I am going to state right off that I'm a linux newbie, so please be > > kind ;) > > > > I have managed to get an old Compaq Proliant 3000 configured with > > LTSP 2.08, and got the workstation booting from a floppy using an > > Intel Pro > > > 100 (thanks rom-o-matic!). I'm using RH 7.1 for the server, and once > > the client gets through loading the kernel I get the following >message: > > > > "tty1, Press <enter> to establish a connection to the server...." > > > > I press enter, and get the following: > > > > "telnet: Unable to connect to remote host: Connection refused" > > > > Any ideas as to what I've configured wrong? I tried searching the > > LTSP archives, but Geocrawler keeps returning an error... > > > > TIA, > > > > Carl > > > > >_____________________________________________________________________ >Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss >For additional LTSP help, try #ltsp channel on irc.openprojects.net ------------------------------------------------- Clovis Sena Itautec.Com Servicos Suporte Tecnico Software/Hardware --------------- Email: [EMAIL PROTECTED] Fone : 0xx81-3421-1126 Fax : 0xx81-3421-4988 ------------------------------------------------- _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
