Greetings,
We're using LTSP as a component in a warehouse management system we are building for a fulfillment house. So far it has worked wonderfully, kudos to all the developers for making such a great software package! There's one thing that's been causing us a little difficulty. We have two devices hooked up to the terminals; a barcode printer on the parallel port, and a barcode scanner (the Symbol P360) on a serial port. Making print queues via the PRINTER_0_* settings in /etc/lts.conf works fine for the printer, and it works for the scanner (which is a read-only device) as well. Unfortunately it only works the first time I connect. If I telnet to the workstation's IP on port 9100 and initiate the data download, the data appears onscreen (with extra linefeeds, for some reason) for as long as I stay connected. I can do as many downloads as I need to. However, if I disconnect (ctrl-], q) and reconnect, no data appears when I initiate download. If I restart lp_server, it works again - until I disconnect and try to reconnect. Is this a feature? If so, how do I turn it off? I briefly scanned the code for lp_server and didn't see anything that would cause this behavior. Thanks, - Adam Wiggins [EMAIL PROTECTED] http://www.trustcommerce.com _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
