Joe, You need option-128 to be e4:45:74:68:00:00 and for option-129, you will need "NIC=ne IO=0xXXX", where XXX is the IO address that the card has been setup for.
Do not try to use Plug-n-play mode on that card, Linux won't deal with it. I usually set my NE2000 cards for IO=0x300. Also, take a look at the bottom of the LTSP instructions page at: http://www.LTSP.org/instructions-3.0.html Nope that helps, Jim McQuillan [EMAIL PROTECTED] On Wed, 16 Jan 2002, Kirk, Joe wrote: > What does option 129 need to be for this card? > Does option 128 need to be specified? > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
