Fathi, Take a look at http://www.LTSP.org/instructions-3.0.html
Down near the bottom are some examples of dhcpd.conf settings. Jim McQuillan [EMAIL PROTECTED] Fathi Ben Nasr wrote: > Hello, > > I have some old x486 with no pci slots (compaq presario cds 522 among > others). > I finaly found some 3c509b nics that could boot from a rom-o-matic.org > generated .lzdsk boot file. > Now, as this are isa nics, they need their driver to specified in the > dhcp response. > The driver loaded by etherboot flopyy is 3c5x9 at 0x0300. > I tried different ways to feed this information to the client but I > still get a Kernel panic and an error message about the isa nic driver. > > Could someone please tell me the correct syntax for option-129 (with > some examples if possible) ? > > Thank You. > Fathi Ben Nasr. > > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
