Jim McQuillan wrote:
> What do you have specified for X_MOUSE_DEVICE ?
Sorry, i forgott to post that part, I have
X_MOUSE_PROTOCOL = "Microsoft"
X_MOUSE_DEVICE = "/dev/ttyS0"
just like we have set in school where we use LTSP, there it works fine.
> By default, the serial.o module is not loaded, that's
> why you don't see the ttyS0 device nodes.
>
> If you specify '/dev/ttyS0' for the X_MOUSE_DEVICE,
> then the rc.local script will (should) automatically
> load the serial module.
Well, I did specify it, but it is not loaded, tested like your next comment.
> At runlevel 3, try 'lsmod' and see if you see
> the serial module loaded.
lsmod does only show ne and 8390 for the NIC
> if not, try modprobe serial
> and then look in /dev for the device nodes.
It just gives me a "Can't open dependencies file
/lib/modules/2.4.9-ltsp-5/modules.dep (No such file or directory)" and
nothing changes.
Serge B Bromow wrote:
> In the "/opt/ltsp/i386/etc/lst.conf" add
> MODULE_01 = serial
> in the workstation definition. This will load
> the serial driver and poof!, the devices will
> appear.
I tried that, but i get the same as with modporbe and afterwards a "ERROR!
loading module: serial failed !".
So what am I missing? Do I nett the .dep file? I cannot locate it in my ltsp
dir, did I just miss/did not untar/deleted by accident/moved that one? I
think we have the same error in school when loading some modules, but they
still work (I think so, but I am not 100% sure!)
Again thanks for any help and your Time ;-)
Claas
(sorry Jim for sending it twice, but i forgott to change the address to the
list address... hate me for that! ;d )
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
