Dyg It, As much as you may WANT your linksys router to serve up dhcp, I just don't think it is going to work.
As far as I know, there's no way within the Linksys to configure all the stuff that an LTSP client needs. Things like root-path and filename. And, if you need to specify any kernel commandline opts, you will also need to specify option-128 and option129. If you do figure out how to get the Linksys to serve up everything you need, then please share that with the rest of us. Thanks, Jim McQuillan [EMAIL PROTECTED] On Wed, 20 Feb 2002, Dyg It wrote: > [As a preface, I _have_ gone through the docs and searched the list archive > and tried numerous configurations - only to end up pulling my hair out] > > My network uses 192.168.1 addresses instead of the default LTS default > (192.168.0) with a subnet mask of 255.255.255.0. > I have a linksys cable/dsl router which also acts as my hub and dhcp server > for my network. Its address is 192.168.1.1. > > I have a machine with ONE ethernet card that I want to run as a Linux > Terminal Server (@ 192.168.1.254). I don't want to add a second ethernet > card or move dhcp to the LTS - it won't be running all the time. I need to > keep the linksys as my dhcp server. > > I want to use rom-o-matic etherboot floppies to boot any workstations. > > So, my question is: > Could some experienced, kind soul take pity on me and help me understand how > I need to configure LTS on the server to make this work? Thanks in advance > > > > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.324 / Virus Database: 181 - Release Date: 2/14/2002 > > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
