The compaqs are 486/22 not 486/26. Sorry. Fathi Ben Nasr a �crit :
> Yes, but it depends on the 486 ( a 26Mhz cpu or a 100Mhz). I have been > able to run a hp 486/66 as a terminal, a compaq 486/26 with 12 Mb ram but > not an identical compaq 486/26 with 4Mb, so I think taht 8Mb is the > minimum requirement. Just remember that 486 were shiped with 1Mb of > video ram and this will restricted resolution/modes taht you can use. > > Koursk OOSeven a �crit : > > > Hi, > > > > What is the minimal hardware requirement concerning > > the workstation? > > > > Is it possible to run ltsp on a 486 with 8MB of RAM > > (with GUI)? > > > > Regards. > > > > __________________________________________________ > > Do You Yahoo!? > > Everything you'll ever need on one web page > > from News and Sport to Email and Music Charts > > http://uk.my.yahoo.com > > > > _____________________________________________________________________ > > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > > For additional LTSP help, try #ltsp channel on irc.openprojects.net > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
