Hi Guys, I'm having the same problem but with a different ethernet card.
I have a Dlink with an etherboot32 4.0 rom. (i think I bought it from Jim 3 years ago!!!). I am trying to migrate to ltsp 3.0.0 . I am running on SuSE 7.0 (fresh install). on Boot up I get an IP address and TFTP happens. Then the kernel boots and says "Cannot auto detect ethernet adapter" I have option option-129 "NIC=ne IO=0x300" Thanks for any help. Lach On Fri, 22 Feb 2002 [EMAIL PROTECTED] wrote: > >Actually, the /linuxrc script will ignore the IO= setting for the > >3c509 cards, so it doesn't matter if you include it or not, > >it won't be passed on to the module. > > > >Currently, the IO= parameter is only used for > >the 3c503, hp_plus, hp and ne. > > > >I think I need to modify it for the wd as well. > > The list of ISA cards that don't need IO is much smaller than the ones > that do so it might be easier to default to passing on the IO unless > it's one of the former. WDs may also need the mem parameter. > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
