Koursk, The X_MODE_0 is the correct keyword to use, but you have the wrong value specified.
You can either have just a resolution, as in: X_MODE_0 = 640x480 Or, you can specify an entire modeline, as in: X_MODE_0 = 640x480 37.44 640 656 720 832 480 480 486 501 +hsync +vsync But, the value you specified, with just the resolution and the hsync,vsync settings is invalid. Jim McQuillan [EMAIL PROTECTED] On Fri, 22 Feb 2002, Koursk OOSeven wrote: > Hi, > > Using a 486 (8MB Ram) with Cirrus Logic (512k) I have > the following error message: > Fatal Server error: Dotclock expected > > lts.conf: > > XSERVER = XF86_SVGA > LOCAL_APPS = N > USE_NFS_SWAP = N > SWAPFILE_SIZE = 48m > X_MOUSE_BUTTONS = 3 > X_MODE_0 = 640x480 +hsync +vsync > RUNLEVEL = 5 > > > Do I need to change the X server? > > Regards, > Koursk > > __________________________________________________ > Do You Yahoo!? > Everything you'll ever need on one web page > from News and Sport to Email and Music Charts > http://uk.my.yahoo.com > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > -- _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
