Jo wrote:
> Ok, I found out I should use the XF86_SVGA. This is what my lts.conf looks
> like:
*snipped for brevity*
> How do I force it to use XFREE 3.3 instead of 4.x or does it know that by
> itself?
XSERVER = XF86_servername
If the value of XSERVER starts with XF86, the terminal will use XFree86
ver3.
> What I get is a black screen. I don't even get to the grey one with the X on
> it. Does anybody have a clue?
How long does this black screen last? Usually, if there's a problem
with your X setup, the server will restart 10 times, then you will get
an error on the screen.
You can look at the logs on the server (/var/log/messages, for example)
to see what's happening.
Try telling the terminal to start at runlevel 3, then run
/tmp/start_ws. This will start the GUI manually; if it fails, you
should see an error on the screen after a minute.
-David
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
