Contact IBM and see if you can update your PXE code. It is likely that the PXE code is BIOS-integrated so you will need the get the latest BIOS update.
Martin Herweg <[EMAIL PROTECTED]> wrote: > >Hi! > >I can successfully boot via PXE with an 3c905C-TX-M NIC >in the Client and K12-LTSP on the Server. > >Then I tried an IBM PC300PL with on-board NIC. >In the BIOS Menu I had the choice between >DHCP and RPL > >with RPL nothing happens, the Client tries to boot from Floppy > >with DHCP I get the message > >"PXE_M05 Initializing network boot device using Interrupt 18h..." > >tcpdump and ethereal on the server show me >that the client is not sending any packets. > >Network cables and switch are ok, I can see "link" but no activity. > >any ideas ? >similar experiences ? > >Greetings, >Martin Herweg > > >_____________________________________________________________________ >Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss >For additional LTSP help, try #ltsp channel on irc.openprojects.net > -- __________________________________________________________________ Your favorite stores, helpful shopping tools and great gift ideas. Experience the convenience of buying online with Shop@Netscape! http://shopnow.netscape.com/ Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
