Mike, There is probably a DiskOnChip or Flash Disk module inside the Winterm. There may also be a floppy or ide header inside the unit, on the motherboard. This is probably unlikely though.
If it is a DiskOnChip from M-Systems, you will need either a DOC programmer card that can be inserted in another system, or you will need another computer that has a DOC socket. You might also look at the Bios. If it is an Award or AMI bios, you may be able to add etherboot to the bios, which would completely ignore the DOC. Hope that helps, Jim McQuillan [EMAIL PROTECTED] On Fri, 1 Mar 2002, Mike Ickes wrote: > Has anyone been able to get a Wyse Winterm to successfully boot LTSP. A > couple of Wyse Winterm 2300T have been given to me and I cannot get past > the ica stuff. I have been on Wyse website in their discontinued section > and can nowhere fine a manual for this model. I can get into the setup and > I can get it to request and get ip from the LTSP server but right after the > ip assignment the unit resets to the setup screen. My var/log/messages show > the request and assignment of an ip. Also does anyone know how to clear off > the Citrix ica stuff off of the Winterm? There is no hard drive or CD-Rom > to flash any kind of bios. There are jumpers and I have set them in > different configs but the ica image is still there. I know their is a > contrib page for getting a linux client to boot ica into a Windows TS but > what I want is to boot the Winterm into the Linux LTSP3.0 and get a KDE > desktop. BTW my LTSP3.0 is working fine. I have a couple of Book PC's that > are booting fine. > > Thanks! > > Mike > > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > -- _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
