Deniz, First of all, get it working without the LPP.
The Linux Progress Patch looks cool, but it can make debugging the boot process nearly impossible. So, try without it, and see what happens. Jim. On Sun, 3 Mar 2002, Deniz Akkus Kanca wrote: > Paz 03 Mar 2002 22:21 tarihinde �unlar� yazm��t�n�z: > > Well, I did read the documentation. It gives me good information about what I > should be doing, however I am unable to recreate the results that LTSP is > getting. Source tarballs would help in quickly recreating what LTSP does, -- > then it would be much easier to add on small changes. > > Here is what I am currently doing: > > Start out with fresh 2.4.9 > Patch with nfs-swap patch from > >http://www.instmath.rwth-aachen.de/~heine/nfs-swap/patches/linux-2.4.9-nfs-swap.diff.gz > > I have not been able to find the lpp patch for version 2.4.9 except in: > http://pof.eslack.org/projects/pof-slackware-lpp/pof-slackware-lpp-2.4.9.tar.gz > I patch with linux-2.4.9lpp-slackware-patch.diff as available from that > tar.gz. > > Change Makefile extraversion to -ltsp-lpp-5 > copy config.2.4.9-ltsp-lpp-5 from ltsp_initrd_kit to the top level as .config > make oldconfig > make dep > make modules > make modules_install > make bzImage > > > I then change buildk to point to where I have built my kernel. > > This kernel does not boot (using etherboot from a floppy). I get a flash of a > slackware boot screen and then total blackness. > > This should have given me a vmlinuz that is equivalent to what comes out of > the ltsp project. > > I am using mknbi 1.2-6 > Redhat 7.2 Linux. > > I am able to boot the workstation using Etherboot floppy and ltsp supplied > vmlinuz. > > If someone can point out what I am doing wrong (and a pointer to the correct > LPP patch) I would greatly appreciate it. > > Best regards, > Deniz > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > -- _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
