I copied the 800x600 modeline statement off the howto and now it works, by sheer luck I'm sure. Should I leave it alone if it works or try to tweak it some more ? The monitors are all relatively new (1-2years old).
-Jeff On Thu, 2002-04-25 at 09:57, Jeff Roberts wrote: > Ok, I did that. Now with one monitor I have goes to sleep, the other > monitor's osd pops up and says "frequency out of range". With either > one, I can ctrl-alt-f1 to get back to vt1 and get video again but there > are no error messages, looks like the card is detected and set up fine. > I'm guessing I need a modeline statement? Can anyone point me in the > right direction for setting one up? > > -Jeff > > > On Wed, 2002-04-24 at 21:26, [EMAIL PROTECTED] wrote: > > Jeff, > > > > Load the ltsp_x336_svga package and set XSERVER = XF86_SVGA > > in the lts.conf file. > > > > i don't know what you can try with X4.1.0. We will be including > > X4.2.0 in the next release in 3 or 4 weeks. > > > > Jim McQuillan > > [EMAIL PROTECTED] > > > > > > On 24 Apr 2002, Jeff Roberts wrote: > > > > > I've got some machines with trident 9440 and trident 9680 based video > > > cards. They worked fine under ltsp 2.08pre2, but I am getting an > > > oversized poor looking screen with 3.0 . I gather from what I read in > > > the archive that swapping to the xfree3.3.6 svga server would probably > > > make the cards work. Can I load the older server for these cards and > > > leave the other machines on xfree4? If so, do I just load the package > > > and set options in lts.conf? Is it possible to try something else to > > > get xfree4 to work with the problem cards? > > > > > > Thanks in Advance, > > > > > > -Jeff > > > > > > > > > > > > > > > _____________________________________________________________________ > > > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > > > For additional LTSP help, try #ltsp channel on irc.openprojects.net > > > > > > > -- > > > > > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
