Maby a bit off topic... An Etherboot/mknbi issue?
I have some Compaq Deskpro XE 560.
Theese are P60 with I think a modified 486 MB with no PCI, only ISA. I'm
trying to boot theese with LTSP. Have K12LTSP 2.0 (LTSP 3.0).
While booting this does not seem all right:
.. = omitted some lines
..
mknbi-1.2-6/first32.c
..
Ramdisk at 0X00FCF000, size 0X00071000
..
hm, page 01000000 reserved twice
..
Kernel command line: rw root=/dev/ram0 init=/linuxrc rw NIC=3c509
..
Memory: 14164k/16640k available (867k kernel code, 2088k reserved, 204k
data, 68k
init, 0k highmem)
..
PCI: No PCI bus detected
..
RAMDISK: Compressed image found at block 0
crc errorFreeing initrd memory: 452k freed
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 68k freed
kmod: failed to exec /sbin/modprobe -s -k binfmt-78f4, errno = 2
kmod: failed to exec /sbin/modprobe -s -k binfmt-78f4, errno = 2
Kernel panic: No init found. Try passing init= option to kernel.
The Ws does of course not go any further.
I don't have any MODULE_xx params in my lts.conf.
Where does this crc error come from?
Has my problem to do with not having any PCI slots?
I have tried with mknbi 1.2-5, 1.2-6, 1.2-7
/Peter
_______________________________________________________________
Have big pipes? SourceForge.net is looking for download mirrors. We supply
the hardware. You get the recognition. Email Us: [EMAIL PROTECTED]
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
