Hello,
As per your instructions i am able to build my own kernel and boot the
machine, but some problem, as the kernel is not detecting my mouse ,
Xwindows
starts bu without mouse support . It gives following error.
Warning: /dev/ttyS1 unable to get status of mouse fd ( Input /Output
error)
While the kernel is booting , it says that detected ps/2 Mouse port.
same config of lts.conf with lts.kernel works perfect.
I need your tips regarding kernel config which modules to add .
the kernel i have build is with ipx support and the size is just 850 k.
HELP
regards
Dinesh
[EMAIL PROTECTED] wrote:
> K.Dinesh,
>
> no, the kernel doesn't support IPX. You'd have to build a custom
> kernel for that.
>
> You need to start with the ltsp_initrd_kit, and also take a
> look at the chapter in the ltsp-3.0 docs about building kernels.
>
> then, stop by the #ltsp IRC channel on irc.openprojects.net and
> we should be able to help you.
>
> Jim McQuillan
> [EMAIL PROTECTED]
>
> On Thu, 2 May 2002, vcare wrote:
>
> > Does the kernel which comes with the distribution supports IPX protocol
> > ?
> > If not
> > then how we should add the IPX.o to the kernel , i want to use Freedos
> > to access Novell using dosemu.
> >
> > Regards
> > K.Dinesh
> >
> >
> >
>
> --
_______________________________________________________________
Have big pipes? SourceForge.net is looking for download mirrors. We supply
the hardware. You get the recognition. Email Us: [EMAIL PROTECTED]
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
