Remi,
I had the same problem with my 486DX and WD90c33 card [western
digital], capable of bpp 8 and 800x600.
Do this to /opt/ltsp/i386/etc/lts.conf file :
[ws001]
XSERVER = XF86_XVGA
X_COLOR_DEPTH = 8
X_VIDEORAM = 512
X_MODE_0 = 800x600 [try without this 1st]
...
...
...
You will likely get 800x600 and 256 color [8bit]. Hope this work for
you. Good luck.
> From: Remi BERNHARD <[EMAIL PROTECTED]>
> I tried both packages : ltsp_x336_svga and ltsp_x336_16vga.
> The screen flashes 3 times, then, here are the logs with ltsp_x336_svga
> package :
>
> _____________________________________________
>
> SVGA : WD : Signature for WD90C[23]X=[0x32 0x34]
> SVGA : WD : Detected : 90C24 Try 90C30 or 90C31 if this doesn't work
> SVGA : WD : FP Lock=0xa0
> SVGA : WD : Current Clock is 0x5
> SVGA : WD : Chipset : wd90c24
> SVGA : WD : Videoram : 512 K
> SVGA : WD : Clocks : 28.32 28.32 28.32 28.32 28.32 28.32 28.32 28.32 28.32
> SVGA : WD : Clocks : 28.32 28.32 28.32 28.32 28.32 28.32 28.32 28.32 28.32
> SVGA : WD : Clocks : 44.80
> (**) SVGA : 16bpp not supported for this chipset
>
> *** A configured device found, but display modes could not be resolved ***
>
> Fatal server error:
> no screens found
--
Best regards,
Bill mailto:[EMAIL PROTECTED]
_______________________________________________________________
Have big pipes? SourceForge.net is looking for download mirrors. We supply
the hardware. You get the recognition. Email Us: [EMAIL PROTECTED]
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
