We have this set-up where in eth0 is attached to LTSP and eth1 in the internet. (i've
got posts bout this!) The thing is, when we boot the wstation, we are stuck with the
GREY SREEN with X CURSOR. We have tried checking all configuration files and have
tried all the other suggestions in the mailing list but we can't get the thing to
work. Does our set-up has anything to do with it. I suspect it is about xdmcp as
inidicated in the manual. Please help! I have attached our ifcfg-files and the network
file as well.
ifcfg-eth0
DEVICE=eth0
BOOTPROTO =none
IPADDR=192.168.0.254
ONBOOT =yes
ifcfg-eth1
DEVICE=eth1
BOOTPROTO=none
BROADCAST=10.10.5.255
IPADDR=10.10.5.42
NETMASK=255.255.255.0
NETWORK=10.10.5.0
ONBOOT=yes
network
NETWORKING=yes
HOSTNAME=dakota
GATEWAY=10.10.5.254
#GATEWAYDEV=eth0
We really need help,. Thanks a lot. Good Day. : )
________________________________________________________
Outgrown your current e-mail service?
Get a 25MB Inbox, POP3 Access, No Ads and No Taglines with LYCOS MAIL PLUS.
http://login.mail.lycos.com/brandPage.shtml?pageId=plus
_______________________________________________________________
Don't miss the 2002 Sprint PCS Application Developer's Conference
August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
