K, Take the '.o' off of the module names.
Jim McQuillan [EMAIL PROTECTED] On Wed, 22 May 2002, vcare wrote: > I am not able to configure a old creative 16 PNP ISA card . it shows > that there is IRQ Conflict at no 7 , > It recognizes the I0 at 220. it says sb.o 4.3(OK) > In my Lts.conf > I have added smodule_01= uart401.o > smodule_02= sb.o > smodule_03=opl03.o > If i give MOdule=sb.o io=0x220 irq=5 dma=1 , it says > MODPROBE cannot locate module sb.o > > Another make of creative PNP ISA card works very well , i have about 8 > old cards , wants to give to schools for there multimedia Linux > Stations. > > Your guidance will be a great help > > Regards > K.Dinesh > > -- _______________________________________________________________ Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
