Shane, the Chips and Technologies 65550 chipset is supported both by X3.3.6 and X4.1.0.
Setting XSERVER = auto should be ok, it should load the 'chips' XFree86 4.1.0 driver. You could force it by setting 'XSERVER = chips'. If you want to capture the output to a file, you could turn on NFS Swap, which mounts the /var/opt/ltsp/swapfiles filesystem. Then, when you run start_ws, do it like this: sh /tmp/start_ws >/tmp/swapfiles/start_ws.out 2>&1 Then, on the server, you should end up with /var/opt/ltsp/swapfiles/start_ws.out Jim. On Wed, 12 Jun 2002, Shane Kennedy wrote: > Can anyone tell me what (if anything) I need to put in the lts.conf file > when using a C&T65550 video chip. > And, if I start the client in R.L.3, how can I save the X startup > messages to the REAL disk on the server. Currently, the client seems to > be trying to start X, using the driver for the server's video !. > > Shane > > > _______________________________________________________________ > > Sponsored by: > ThinkGeek at http://www.ThinkGeek.com/ > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > -- _______________________________________________________________ Sponsored by: ThinkGeek at http://www.ThinkGeek.com/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
