Ken, the /opt/ltsp/i386 SHOULD be read-only. You certainly don't want any of your workstations modifying anything in that directory.
Jim McQuillan [EMAIL PROTECTED] On 28 Jun 2002, Ken wrote: > It turns out that it was the exports file. It had the LTSP directory as > read only. I changed that per someone's advice here and it got past that > point. Thanks for the help. > > Ken > > > > > On Fri, 2002-06-28 at 11:29, Tom Allison wrote: > > [EMAIL PROTECTED] wrote: > > > > > Ken, > > > > > > Try running: showmount -e > > > to see if you are really exporting the directories to the > > > correct range of IP addresses. > > > > > > Also, check your root-path entry in dhcpd.conf, to make sure > > > you are going after the proper server address. > > > > > > Sorry, there is no client-side log of boot messages. > > > You might look in /var/log/messages for any server related messages > > > from nfsd or mountd. > > > > > > Jim McQuillan > > > [EMAIL PROTECTED] > > > > > > > > > On 27 Jun 2002, Ken wrote: > > > > > > > > >>I'm getting a kernel panic that says something about not being able to > > >>mount "/opt/ltsp/... I can't remember the rest. Is there a log that LTSP > > >>keeps of failed boot attempts that I can print and stick in here so you > > >>can see exactly what error I get? > > >> > > >>I'm using a different IP range since our network is not using > > >>192.168.0.0. I changed every reference to the 192 IP address range and > > >>the client finds the DHCP server and get's to the point of mounting and > > >>then the kernel panic. Any ideas? > > >> > > >>Thanks > > >> > > >>Ken > > >> > > > > > > On a side note. I found that on the A21m notebook from IBM, a fast > > POST BIOS will prevent the eepro100 module from being detected. > > If I change the BIOS boot option to perform a POST, then it's OK. > > > > > > > > ------------------------------------------------------- > > This sf.net email is sponsored by:ThinkGeek > > Caffeinated soap. No kidding. > > http://thinkgeek.com/sf > > _____________________________________________________________________ > > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > > For additional LTSP help, try #ltsp channel on irc.openprojects.net > > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Caffeinated soap. No kidding. > http://thinkgeek.com/sf > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > -- ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek No, I will not fix your computer. http://thinkgeek.com/sf _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
