Hi Rafael,
for me it looks like (as you set the XSERVER-entry in the lts.conf on auto)
that you've got video-cards which are based on an S3 chip. Just install the
ltsp-xserver package for S3 and everything should be fine.
It's called somthing like: ltsp_x336_s3-3.0.0-0.i386.rpm (if you are using X
in the version 3).
hope this will solve your prob.
regards,
Tom(my)___
On Tuesday 23 July 2002 01:05, you wrote:
> Dear friends,
>
> I am having some problems in setting up a new workstation.
> I have two workstations working just fine, but I am attempting to setup a
> new one and am getting an error message that I never had to deal with
> before.
> I searched the documentation and this mailing list for a similar problem
> and was unnable to find anything like it.
>
>
> My NIC is rtl8139c
> The system is a Pentium 75
>
> We tried the following kernels:
> vmlinuz-2.4.18-ltsp-1
> vmlinuz-2.4.9-ltsp-5
> vmlinuz-2.4.9-ltsp-lpp-5
>
> Here is the error:
>
> ...
> Buliding the XF86config file
> Building the start_ws script
> Starting Syslogd
> /tmp/start_ws: /usr/X11R6/bin/XF86_S3: No such fle or directory
> /tmp/start_ws: /usr/X11R6/bin/XF86_S3: No such fle or directory
> /tmp/start_ws: /usr/X11R6/bin/XF86_S3: No such fle or directory
> ( ad infinitum...)
>
> Here is my DHCPD.CONF:
>
>
> #Sample dhcpd.conf file for LTSP
>
> ddns-update-style none;
> default-lease-time 21600;
> max-lease-time 21600;
>
> option subnet-mask 255.255.255.0;
> option broadcast-address 192.168.13.255;
> option routers 192.168.13.216;
> option domain-name-servers 192.168.13.216;
> option domain-name "cta.develop.com";
> option root-path "192.168.13.216:/opt/ltsp/i386";
> #option option-128 code 128 = string;
> #option option-129 code 129 = text;
>
>
> shared-network WORKSTATIONS {
> subnet 192.168.13.0 netmask 255.255.255.0 {
> filename "/lts/vmlinuz-2.4.18-ltsp-1";
> }
> }
>
> group {
> use-host-decl-names on;
> option log-servers 192.168.13.216;
>
> host ws001 {
> hardware ethernet 00:20:18:8C:39:37;
> fixed-address 192.168.13.227;
> }
> host ws002 {
> hardware ethernet 00:60:67:01:CC:3D;
> fixed-address 192.168.13.229;
> }
>
> host ws003 {
> filename "/lts/vmlinuz-2.4.9-ltsp-5";
> hardware ethernet 00:40:f4:44:ed:e8;
> fixed-address 192.168.13.228;
> }
> }
>
>
> And here is my lts.conf
>
> #
> # Config file for the Linux Terminal Server Project (www.ltsp.org)
> #
>
> [Default]
> SERVER = 192.168.13.216
> XSERVER = auto
> X_MOUSE_PROTOCOL = "Microsoft"
> X_MOUSE_DEVICE = "/dev/ttyS0"
> X_MOUSE_RESOLUTION = 50
> X_MOUSE_BUTTONS = 3
> USE_XFS = N
> LOCAL_APPS = N
> RUNLEVEL = 5
>
> #--------------------------------------------------------------------------
>- ---
> #
> # Example of specifying X settings for a workstation
> #
> [ws001]
> XSERVER = auto
> LOCAL_APPS = N
> USE_NFS_SWAP = N
> SWAPFILE_SIZE = 48m
> RUNLEVEL = 5
> X_MODE_0 = 800x600
>
> [ws002]
> XSERVER = auto
> LOCAL_APPS = N
> USE_NFS_SWAP = N
> SWAPFILE_SIZE = 64m
> RUNLEVEL = 5
> X_MODE_0 = 800x600
>
> [ws003]
> XSERVER = auto
> LOCAL_APPS = N
> USE_NFS_SWAP = N
> SWAPFILE_SIZE = 48m
> RUNLEVEL = 5
> X_MODE_0 = 800x600
> #
> # ws004 is my virtual workstation running in a VMware session
> #
> #[ws004]
> # DNS_SERVER = 192.168.0.254
> # XSERVER = auto
> # X4_BUSID = "PCI:0:15:0"
> # X_MODE_0 = 800x600
> # LOCAL_APPS = N
> # USE_NFS_SWAP = N
> # SWAPFILE_SIZE = 64m
> # RUNLEVEL = 5
>
> #--------------------------------------------------------------------------
>- ---
> #
> # Example of a workstation configured to load some modules
> #
> #[ws001]
> # MODULE_01 = agpgart.o # This is for i810 video
> # MODULE_02 = uart401.o
> # MODULE_03 = sb.o io=0x220 irq=5 dma=1
> # MODULE_04 = opl3.o
>
> #--------------------------------------------------------------------------
>- ---
> #
> # Example of ws001 configured for local apps
> #
> #[ws001]
> # LOCAL_APPS = Y
> # LOCAL_WM = Y
> # NIS_DOMAIN = ltsp
> # NIS_SERVER = 192.168.0.254
>
> #--------------------------------------------------------------------------
>- ---
> #
> # Example of a serial printer attached to /dev/ttyS1 on workstation ws001
> #
> #[ws001]
> # PRINTER_0_DEVICE = /dev/ttyS1
> # PRINTER_0_TYPE = S # P-Parallel, S-Serial
> # PRINTER_0_PORT = 9100 # tcp/ip port: defaults to 9100
> # PRINTER_0_SPEED = 9600 # baud rate: defaults to 9600
> # PRINTER_0_FLOWCTRL = S # Flow control: S-Software (XON/XOFF),
> # # H-Hardware (CTS/RTS)
> # PRINTER_0_PARITY = N # Parity: N-None, E-Even, O-Odd
> # # (defaults to 'N')
> # PRINTER_0_DATABITS = 8 # Databits: 5,6,7,8 (defaults to 8)
>
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _____________________________________________________________________
> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help, try #ltsp channel on irc.openprojects.net
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
