Fabio,
Where is your NIC declared? What type of NIC in the client? Which
version of LTSP are you using?
I suspect the problem comes from NIC not declared correctly.
> I can boot the test client via etherboot, tftp and dhcp, but after
>> kernel execution init hangs on "Running dhclient" (after a while it
>> complains about "No dhcpcd-eth0.info file ..." and panics).
> host ws001 {
>> hardware ethernet 00:00:E8:9E:B6:7D;
>> fixed-address 192.168.1.199;
>> filename "/lts/vmlinuz-2.4.18-ltsp-1";
--
Best regards,
Bill mailto:[EMAIL PROTECTED]
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
