Bill, I had this problem a while back. Check your dhcpd.conf file. Make sure that the image is actually where the dhcpd.conf file points too. Try moving the image to /tftpboot/lts/(image-name) and making the correction in the dhcpd.conf file
> I have been following the list for a while, and reading the archives, > but no clear answer yet that I can find, so, I'll post my question. I > have successfully passed the DHCP Configuration. I edited it alittle to > allow for fitting into my existing network. The issue I believe is with > TFTPD. On the client, it passes the dhcp handshake, gets it's IP, then > it says something to the effect of 192.168.1.3:/lts/boot/vmlinuz-(the > nic) not found error 1. (192.168.1.3 is the server, assigned) > > Not really sure where to go from here. I was thinking maybe there is > something with the rom-o-matic boot disk. or perhaps the TFTPD > configuration, or the DHCPD configuration... > > Any thoughts would be greatly appreciated > > -bill watters ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
