Tomy,

You are having a problem with the Display manager,
probably KDM, GDM or XDM.

It sounds like the display manager isn't listening on
port 177 for incoming connections from the workstations.

To prove this, do this:

   netstat -anp | grep ":177 "

it will probably return nothing at all.

The next step would be to figure out which display
manager is configured to run on your server.

Try this:

   ps -e | grep dm

That should show something like:

  10713 ?        00:00:00 kdm
  29551 ?        00:00:01 sendmail

In the example above, you'll see that 'kdm' is the
display manager running on my system.

Notice that 'sendmail' appears, that is because it matched
what you are grepping for 'dm'.

Anyway, once you figure out whether it is kdm, gdm or xdm,
you need to configure it to allow remote requests.

here is what to do for whichever display mgr is enabled
on your system:

kdm   edit the /etc/kde/kdm/kdmrc file, and look for
      the '[Xdmcp]' section.  Make sure it says:

      [Xdmcp]
      Enable=true

gdm   edit the /etc/X11/gdm/gdm.conf file and look for
      the '[xdmcp]' section.  Make sure it says:

      [xdmcp]
      Enable=true

xdm   edit the /etc/X11/xdm/xdm-config.  Look for the
      line that says 'DisplayManager.requestPort' and
      make sure it is commented out.


You should only need to configure one of the display managers
above, whichever is running on your system.

If none of the display managers are running, then you need
to make sure your server is in runlevel 5.  You can verify
this with the 'runlevel' command.  It should produce
output like this:

   N 5

The 2nd field indicates the current runlevel.

And finally, once you have configured your display manager
to allow remote connections, you need to restart the
display mgr.  In your case, I recommend that you just
reboot the server.

Once rebooted, you should be able to run
the netstat command (shown above) again, and see output like this:

  udp     0    0 0.0.0.0:177      0.0.0.0:*      26318/kdm


Jim McQuillan
[EMAIL PROTECTED]




On Tue, 27 Aug 2002, Tomy Ismail wrote:

> Why does when the X start but nothing happened, only a grey
> windows and mouse cursor but no login windows. My client
> using Sis onboard and my server using NVidia ,anyone please
> ?
> ---------------------  Yang Mudah dan Menghibur ----------------------------
> 
>  
> 
> Hosting menjadi mudah dan murah hanya di PlasaCom. Klik http://idc.plasa.com
> 
> F1 Mania!! Ikuti F1 Game di Obelix Game Corner di 
>http://www.plasa.com/infotel/f1.html
> 
>  
> 
> 
>---------------------------------------------------------------------------------------
> 
> 
> 
> -------------------------------------------------------
> This sf.net email is sponsored by: OSDN - Tired of that same old
> cell phone?  Get a new here for FREE!
> https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
> _____________________________________________________________________
> Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
>       https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help,   try #ltsp channel on irc.openprojects.net
> 

-- 



-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone?  Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
_____________________________________________________________________
Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,   try #ltsp channel on irc.openprojects.net

Reply via email to