thanks philip. i tried using the default settings of option-129 ... but i
still get a kernel panic message. as for the vendor tags, i'll try to look
for the NE2000 on the net.
by the way, is the default setting option-129 for NE2000?
thanks again!
> Hi Jopoy,
>
> Actually it's option 129 (kernel params). Since you have
> an ISA card it cannot be autodetected by the kernel
> (newer PCI cards are already autodetected) . You have to explicitly
specify it in the kernel parameters
> (facilitated by etherboot through option-129, see vendortags
> in etherboot for more details to know these tags work).
>
> For example, a workstation declaration in your /etc/dhcpd.conf
> file might look similar to:
>
> host WorkstationOne {
> #- the MAC address of your card goes here...
> hardware ethernet xx:xx:xx:xx:xx:xx;
>
> #- the IP address you want assigned....
> fixed-address 192.168.10.1;
>
> #-this is where you tell the kernel about your card. Note:the
> IO address can sometimes be omitted ;-) option option-129
> "NIC=ne IO=0x300";
>
> <snip>
> }
>
> Hope this helps,
>
> phil
>
> "Jopoy C. Solano" <[EMAIL PROTECTED]> quoted last 8/24/02
> 2:14:48 PM as follows:
> >
> >hi!
> >
> >i've been having problems w/ NE200 isa lan cards .... it says kernel
> >panic ... and asks me to modify option 29. i uncommented the "option-29"
in
> >the dhcpd.conf and i still get the same messages.
> >
> >any suggestion is highly appreciated.
> >
> >TIA :)
> >
> >'jopoy
> >
> >
> >
> >
> >-----------------------
> >University of Baguio
> >General Luna Road
> >Baguio City
> >Philippines 2600
> >
> >Phone: +63 74 4423540
> >Fax: +63 74 4423071
> >
> >http://www.ubaguio.edu
------- End of Original Message -------
-----------------------
University of Baguio
General Luna Road
Baguio City
Philippines 2600
Phone: +63 74 4423540
Fax: +63 74 4423071
http://www.ubaguio.edu
-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
