Thanks for the information, but finally I took another option and I
added to the /opt/ltsp/i386/etc/lts.conf file the folling commands:
X4_MODULE_01 = "GLcore"
X4_MODULE_02 = "glx"
X4_MODULE_03 = "bitmap"
X4_MODULE_04 = "dbe"
X4_MODULE_05 = "ddc"
I think only the first two modules are needed for openGL, need to check
that however.
Hilaire
Le ven 20/09/2002 � 16:02, Bhaskar S. Manda a �crit :
> On 20 Sep 2002 15:41:49 +0200, Hilaire Fernandes wrote
> > However I want to run Celestia which required OpenGL but wihtout
> > success, I got a 'OpenGL not supported' error message.
> >
> > I did install mesa but it was not enought. Do I need to write some
> > configuration? If so, where?
>
> Can you try with a specified XF86Config file for the particular client with
> these modules loaded in it?
>
> Section "Module"
> Load "GLcore"
> Load "bitmap"
> Load "dbe"
> Load "ddc"
> Load "dri"
> Load "extmod"
> Load "freetype"
> Load "glx"
> Load "int10"
> Load "pex5"
> Load "record"
> Load "speedo"
> Load "type1"
> Load "vbe"
> Load "xie"
> EndSection
>
> --
> bhaskar
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _____________________________________________________________________
> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help, try #ltsp channel on irc.openprojects.net
--
SC�R�N
CRDP d'Aquitaine/CDDP des Landes
Ing�nierie �ducative
640, rue du Ruisseau
40012 Mont de Marsan Cedex
T�l. 05.58.75.50.10
-------------------------------------------------------
This sf.net email is sponsored by: DEDICATED SERVERS only $89!
Linux or FreeBSD, FREE setup, FAST network. Get your own server
today at http://www.ServePath.com/indexfm.htm
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
