After the kernel is load it tries to mount NFS share. You should have you /etc/exports file set apropriately. Do you have a NFS server running in your server (If installed it can be started with the '/etc/init.d/nfs start' command)
Hilaire On Tue, 1 Oct 2002 09:29:57 -0500 "Joey Officer" <[EMAIL PROTECTED]> wrote: > I don't recall, but isn't there a minimum RAM requirement. I thought it was > 32mb? > > It may be completely unrelated, but if you have some spare ram, try that. > > Joey Officer > Martin Apparatus, Inc. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Arjan > Sent: Monday, September 30, 2002 1:36 PM > To: [EMAIL PROTECTED] > Subject: [Ltsp-discuss] With a little help... (newby) > > All, > > I'm quite a novice on LTSP, but do know my way around Linux. Took me > some days to set my first steps on LTSP: > - Get DHCP running (kept nagging over my second network interface, on > which it should not listen) > - Get TFTP installed and running (RH 7.3 doesn't install the RPM and > when you do this manually, the service is disabled by default!). > - Creating a bootfloppy was no problem at all, thanks to the rom-o-matic. > > But..... the client PC boots, gets an IP address, get's a kernel but > stalls completely right after the kernel is booted. > > I couldn't find similar problems on the mailing list, so every advise is > appreciated! > > Client: > Pentium 1, 60 Mhz, 16 MB internal memory > I had Linux RH6.2 running on it without problems. > > Display on client during boot (the final part): > vmlinuz-2.4.19-ltsp-1... (NBI) ................. > A20 disabled via BIOS > mknbi-1.2-7/first32.c (GPL) > Top of ramdisk is 0X00000000 > Ramdisk at 0XFFF4D000, size 0X000B3000 > Uncompressing Linux..., ok, booting the kernel > (then the client stalls) > > Thanx in advance, > Arjan. > > > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > > > > ------------------------------------------------------- > This sf.net email is sponsored by: DEDICATED SERVERS only $89! > Linux or FreeBSD, FREE setup, FAST network. Get your own server > today at http://www.ServePath.com/indexfm.htm > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net ------------------------------------------------------- This sf.net email is sponsored by: DEDICATED SERVERS only $89! Linux or FreeBSD, FREE setup, FAST network. Get your own server today at http://www.ServePath.com/indexfm.htm _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
