Stephen, Ok, go to http://www.LTSP.org
In the upper right-hand corner of the page, there is a section that says 'LTSP on IRC' and there is a link for more information. Read the more information, and wherever it says to use '#ltsp', you can use '#samba' instead. Jim McQuillan [EMAIL PROTECTED] On Sat, 5 Oct 2002, Stephen Liu wrote: > Hi Jim, > > Thanks for your advice > > At 10:56 PM 10/4/2002 -0400, [EMAIL PROTECTED] wrote: > >Stephen, > > > >You might try the #samba IRC channel on irc.openprojects.net > > Could you please give me more information. I tried google.com searching > for information but can't find things relevant. Some information is in > Japanese > > http://irc.openprojects.net > > is a blank page > > http://www.openjects.net > > links to > > http://freenode.net/ > > Thanks > > Stephen > > > >On Sat, 5 Oct 2002, Stephen Liu wrote: > > > > > Hi All Folks > > > > > > I encountered difficulty in connecting a WinXP box to Samba Server. Ping > > > on WinXP showed connected and on LTSP server also showed connecting. > > > > > > "cygwin" worked connecting WinXP and Samba Server > > > > > > RH7.3 > > > Samba-2.2.3a > > > Connection - via a crossover cable > > > On WinXP - Shared folder under C:\ > > > > > > LTSP Server > > > name of computer=server.ltsp > > > password=yes > > > IP add=192.168.0.254 > > > > > > Workgroup=SEC > > > > > > WinXP > > > (It works as Diskless Workstation and Standalone workstation as well) > > > name of computer=M40G > > > password=no > > > IP add=192.168.0.1 > > > > > > Hereinbelow are my test results: > > > ======================= > > > ipchains STOP > > > > > > ****** > > > /etc/samba/smb.conf > > > # Samba config file created using SWAT > > > # from UNKNOWN (127.0.0.1) > > > # Date: 2002/10/04 19:55:55 > > > # Global parameters > > > > > > [global] > > > workgroup = SEC > > > server string = Samba %v > > > security = SHARE > > > guest account = M40G > > > hosts allow = Yes > > > > > > [test] > > > comment = test share > > > path = /test > > > writable = yes > > > browseable = yes > > > follow symlinks = yes > > > wide links = yes > > > public = yes > > > read only = No > > > guest only = Yes > > > guest ok = Yes > > > ******** > > > > > > # mount > > > /dev/hde2 on / type ext3 (rw) > > > none on /proc type proc (rw) > > > usbdevfs on /proc/bus/usb type usbdevfs (rw) > > > /dev/hde1 on /boot type ext3 (rw) > > > none on /dev/pts type devpts (rw,gid=5,mode=620) > > > none on /dev/shm type tmpfs (rw) > > > none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) > > > //M40G/Shared on /mnt/WinXP type smbfs (0) > > > > > > # cd /mnt/WinXP/ > > > # ls > > > # > > > (It did not mount) > > > > > > > > > # smbclient -L \\\\O\\ > > > added interface ip=192.168.0.254 bcast=192.168.0.255 nmask=255.255.255.0 > > > added interface ip=218.188.79.94 bcast=218.188.79.255 nmask=255.255.252.0 > > > Connection to O\ failed > > > > > > # smbclient -L 192.168.0.1 > > > added interface ip=192.168.0.254 bcast=192.168.0.255 nmask=255.255.255.0 > > > added interface ip=218.188.79.94 bcast=218.188.79.255 nmask=255.255.252.0 > > > session request to 192.168.0.1 failed (Called name not present) > > > session request to 192 failed (Called name not present) > > > Password: (there is no passwork) [Enter] > > > Domain=[SEC] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager] > > > Sharename Type Comment > > > --------- ---- ------- > > > IPC$ IPC Remote IPC > > > D$ Disk Default share > > > print$ Disk Printer Drivers > > > SharedDocs Disk > > > Printer8 Printer HP DeskJet 690C > > > Printer5 Printer Acrobat Distiller > > > Printer2 Printer Print to this device to send a fax. > > > ADMIN$ Disk Remote Admin > > > C$ Disk Default share > > > Shared Disk > > > Printer Printer Print to this device to send a photo quality fax. > > > Server Comment > > > --------- ------- > > > M40G MAXTOR-40G > > > SERVER Samba 2.2.3a > > > > > > Workgroup Master > > > --------- ------- > > > SEC M40G > > > # > > > # smbmount //M40G/Shared /mnt/WinXP > > > Password: (there is no password) [Enter] > > > # > > > > > > > > > # cd /mnt/WinXP > > > # ls > > > # > > > > > > (It did not mount. Shared folder not found) > > > > > > > > > WinXP > > > ====== > > > On Window Explorer > > > C:\My Network Places\Microsoft Windows Network\SEC\ > > > showing > > > > > > M40G > > > Samba 2.2.3a (Server) > > > > > > right click "Samba 2.2.3a (Server)" -> Properties > > > displayed > > > > > > Microsoft Networking > > > The server Server could not be found on the network > > > [OK] > > > > > > > > > Kindly help > > > > > > Stephen Liu > > > > > > > > > > > > > > > ------------------------------------------------------- > > > This sf.net email is sponsored by:ThinkGeek > > > Welcome to geek heaven. > > > http://thinkgeek.com/sf > > > _____________________________________________________________________ > > > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > > > For additional LTSP help, try #ltsp channel on irc.openprojects.net > > > > > > >-- > > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > -- ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
