Heimo, Sounds like you are booting a tagged kernel, prepared for an etherboot bootrom. But, you aren't using an etherboot bootrom on the NIC, you are using whatever is built in. this is shown in the fact that it works fine from an etherboot floppy.
You either need to re-flash the card with Etherboot, to replace whatever is there. or, you need to get a kernel that will boot using whatever is on that card. My guess is that you have PXE code on the card. For that, grab the pxestuff package from the ltsp.org download page. There's a readme file in there explaining how it all works. Jim McQuillan [EMAIL PROTECTED] On Mon, 14 Oct 2002, Heimo Hecker wrote: > Hi there, > > i have configured with ltsp an Terminal Server. One of my clients is a > Compaq PC with nic on bord. It is a Intel Ether Pro 100. This card can > boot from network. But it does not work. The card get his IP, but can?t > download the kernel via tftp. I get the error "TFTP to many packages". > With a bootrom for intel on floppy all works well. > Any ideas what i have to change in my config? > > regards > > Heimo > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > -- ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
