At another store, they carry this chip 27c256-15m with or without a little window at the middle, this chip is mentioned in jims montribution here
http://ltsp.org/documentation/eproms.txt and it says: If it is a 28-pin, then likely a 27c128 or 27c256 will do the trick for you. You'll also have to pick the speed of the chip. I try to stick with 150's or faster. The part number would usually be something like 27c128-150. The 27c128 and 27c256 chips seem to be really hard to find. I'm worried that at some point, they will dissappear from the market completely. For the rtl8139 based cards that i've used, they either had a 28-pin or a 32-pin socket. In both cases, I could use the 27c128 chips. You just need to insert the 28-pin chip into the bottom end of the 32-pin socket. That is, the extra holes in the socket are at the end where the notch is. I've drawn a crude picture of a chip, it's at the bottom of this document. So I guess Im pretty close, but I dont know if its close enough, does anyone of you have any idea if this 27c256-15m variation works on my rtl8139 ethernet card? I fount this doc about it but there is no mention on the -15m variation 8( http://www.batronix.com/pdf/27c256.pdf thanks in advanced. --- pedro noticioso <[EMAIL PROTECTED]> wrote: > > Hi all > > I called steren, and asked for ERPOM, they told me > thay they only carry this product and its a double > eprom > > m27c256b-15s1 32k*8 > > does it look familiar? > > I told them it was for network booting and they did > now know anything related 8/ > > > --- David Harrison <[EMAIL PROTECTED]> > wrote: > > > > > > > We have some PCs that require: > > > > X_MOUSE_DEVICE = "/dev/ttyS1" > > > > instead of the usual ttyS0. > > > > I've never figured out why. > > > > > From: "Bhaskar S. Manda" <[EMAIL PROTECTED]> > > > To: [EMAIL PROTECTED] > > > Reply-To: [EMAIL PROTECTED] > > > Subject: Re: [Ltsp-discuss] Can't put my serial > > mouse to work on ltsp !! > > > Date: Wed, 13 Nov 2002 12:35:18 -0500 > > > > > > On Tue, 12 Nov 2002 23:36:21 -0200, Email > > [EMAIL PROTECTED] wrote > > > > I've tried many types of file configuration ( > > lts.conf ) but can't have > > > > my genius scroll serial mouse to work on my > ltsp > > terminal ( old 486 and > > > > pentium 100/133 ) . Can anybody help me with > > this configuration ?? > > > > > > Can you post the lines for this wkstn from your > > lts.conf? > > > They should contain the folowing. > > > > > > X_MOUSE_DEVICE = "/dev/ttyS0" > > > > > > -- > > > bhaskar > > > begin:vcard > > n:Harrison;David M. > > tel;fax:416 978 1547 > > tel;work:416 978 2977 > > x-mozilla-html:FALSE > > org:University of Toronto;Department of Physics > > version:2.1 > > email;internet:[EMAIL PROTECTED] > > title:Senior Lecturer > > adr;quoted-printable:;;Room MP121B=0D=0A60 St. > > George St.;Toronto;Ontario;M5S 1A7;Canada > > fn:David M. Harrison > > end:vcard > > > > > __________________________________________________ > Do you Yahoo!? > U2 on LAUNCH - Exclusive greatest hits videos > http://launch.yahoo.com/u2 > > > ------------------------------------------------------- > This sf.net email is sponsored by: Are you worried > about > your web server security? Click here for a FREE > Thawte > Apache SSL Guide and answer your Apache SSL security > > needs: http://www.gothawte.com/rd523.html > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or > change prefs, goto: > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net __________________________________________________ Do you Yahoo!? U2 on LAUNCH - Exclusive greatest hits videos http://launch.yahoo.com/u2 ------------------------------------------------------- This sf.net email is sponsored by: Are you worried about your web server security? Click here for a FREE Thawte Apache SSL Guide and answer your Apache SSL security needs: http://www.gothawte.com/rd523.html _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
