On Wed, 2002-11-20 at 06:20, [EMAIL PROTECTED] wrote: > XDMCP is normally on 177 but is udp. Have no idea what ia out at 6000 unless you >modifed your xdmcp in which case you will need make mods in the lstp.conf i think. > > Evan > > 6000 is x11, you can check in /etc/services. Sounds like the wrong xserver has been started. Instead of the standard one that comes with ltsp try using one specific for your hardware. eg. i have s3 based video cards so i use XF86_S3 regards garry > On Tue, 19 Nov 2002 14:51:09 -0200 > "Robson" <[EMAIL PROTECTED]> wrote: > > > Hi ! > > > > The problem .... > > > > The X dont start on Diskless Worktation, but if I run a nmap from server > > to Workstation > > I found the service 6000 with UP status. > > When I press CRTL+ALT+F1 on workstation I can see only this message --> > > succeded. > > > > Anyone have any idea ??? > > > > > > Thanks, > > > > Robson ( Sorry bad english) > > > > > > > ------------------------------------------------------- > This sf.net email is sponsored by: To learn the basics of securing > your web site with SSL, click here to get a FREE TRIAL of a Thawte > Server Certificate: http://www.gothawte.com/rd524.html > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net >
------------------------------------------------------- This sf.net email is sponsored by: To learn the basics of securing your web site with SSL, click here to get a FREE TRIAL of a Thawte Server Certificate: http://www.gothawte.com/rd524.html _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
