is it possible that the eth0 on this particular workstation is using the
same IRQ as a different device.  try removing all other hardware, and also
disable the onboard IDE devices (assuming you aren't using them) and see if
that fixes the problem

joey


-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Arnel G.
Pastrana
Sent: Tuesday, December 03, 2002 9:32 AM
To: [EMAIL PROTECTED]
Subject: [Ltsp-discuss] eth0: too much work


Hi everyone:)

is there anybody who encounter this problem?

This is the log messages that comes to /var/log/messages:

Dec  3 23:24:14 server1 last message repeated 13 times
Dec  3 23:21:04 server1 kernel: eth0: Too much work at
interrupt,IntrStatus=0x0001.
Dec  3 23:24:14 server1 last message repeated 13 times
Dec  3 23:21:04 server1 kernel: eth0: Too much work at interrupt,
IntrStatus=0x0001.

I am using a floppy boot in my ws, i cant boot in my ws.  It just say :
Probing..... [RTL 8139 ] found Realtek 8139 ROM address 0X000 -io addr
0XEC09 add Searching for server (DHCP) ..... ....

Any idea pls?

Thanks

Arnel G. Pastrana





-------------------------------------------------------
This SF.net email is sponsored by: Get the new Palm Tungsten T
handheld. Power & Color in a compact size!
http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en
_____________________________________________________________________
Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,   try #ltsp channel on irc.openprojects.net



-------------------------------------------------------
This SF.net email is sponsored by: Get the new Palm Tungsten T 
handheld. Power & Color in a compact size! 
http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en
_____________________________________________________________________
Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,   try #ltsp channel on irc.openprojects.net

Reply via email to