Anthony, You have to make sure that the workstations on the 2nd subnet are actually going to the correct IP address of the correct card on the server.
This is controlled by the XDM_SERVER parameter in the lts.conf file. Jim McQuillan [EMAIL PROTECTED] On Wed, 4 Dec 2002, Anthony Tanbakuchi wrote: > > Hi, > > I have a ltsp server that has 2 network cards that server terminals in > two subnets. Everything is working great for the second ethernet card > except for GDM. The terminals boot off dhcp, do tftp, nfs mount, but > then only a grey screen. GDM does not start up! I am sure I just > missed a config or something. I looked in the GDM and XDM setting files > in /etc/X11/.. but didn't see anything about security settings for a > given subnet. Terminals on the first ethernet card (the first subnet) > work perfect (GDM and all). > > Any thoughts on what I should modify? > > Kind regards, > > Anthony Tanbakuchi > > > > > ------------------------------------------------------- > This SF.net email is sponsored by: Microsoft Visual Studio.NET > comprehensive development tool, built to increase your > productivity. Try a free online hosted session at: > http://ads.sourceforge.net/cgi-bin/redirect.pl?micr0003en > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > -- ------------------------------------------------------- This SF.net email is sponsored by: Microsoft Visual Studio.NET comprehensive development tool, built to increase your productivity. Try a free online hosted session at: http://ads.sourceforge.net/cgi-bin/redirect.pl?micr0003en _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
