put the original command.com back in its place, and create a file called autoexec.bat, any text you write in autoexec.bat will be executed, so thats where you should put the name of the etherboot file in 8)
8) --- INET Administrator <[EMAIL PROTECTED]> wrote: > I have succesfully setup a Compact Flash card bootup > using a card formatted and sys'd in win9x and a DOS > etherboot image. I copied the etherboot image to the > CF card, deleted the win9x command.com and renamed > the etherboot image to command.com (initially tried > a DOS 6.22 format but client always freezes at > VERIFYING DMI POOL DATA) > > Everything works perfectly, client boots into X, use > programs etc... but with 1 small annoying problem. > The client booting off the CF card always shows the > following message just after the pc POST info:- > > Type the name of the Command Interpretor (e.g., > c:\command.com) > C> > > I type in command.com and the boot process > continues. > > Any idea's appreciated, maybe I should format the CF > card in linux and setup a linux boot image. I am a > linux newbie but if someone can give me good enough > instructions I will have a go at anything once. > > Regards, > Brendan H. > __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
