Hi pedro, Thanks for your response.
On Fri, 2002-12-13 at 08:59, pedro noticioso wrote: > > yes it works, just need to add this at lts.conf > > X_MODE_0 640x486 > X_MODE_1 800x600 > X_MODE_2 1024x768 > > if you change the order, the combinations will follow > accordingly, ie > > X_MODE_0 800x600 > X_MODE_1 640x486 > X_MODE_2 1024x768 I have following 3 modelines in Defaults section of the lts.conf file. X_MODE_0 = 640x480 31.5 640 664 704 832 480 489 492 520 +hsync +vsync X_MODE_1 = 800x600 40 800 840 968 1056 600 601 605 628 +hsync +vsync X_MODE_2 = 1024x768 44.9 1024 1048 1208 1264 768 776 784 817 interlace It works nice but I could not toggle on diskless workstation. I have tried your version but failed. The monitor vibrated and could not read. Any suggestion? Thanks in advance. Stephen Liu > --- Stephen Liu <[EMAIL PROTECTED]> wrote: > > Hi All Folks, > > > > How to change screen resolution on diskless > > workstation > > > > Is there a method to toggle screen resolution on > > client's monitor. > > <Ctrl>+<Alt>+<+> does not work. It works on monitor > > of the server > > > > Kindly advise. > > > > Thanks > > > > Stephen Liu ------------------------------------------------------- This sf.net email is sponsored by: With Great Power, Comes Great Responsibility Learn to use your power at OSDN's High Performance Computing Channel http://hpc.devchannel.org/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
