Piotrek,
this is how you set up a usb printer in the lts.conf:
#usb printer
# MODULE_01 = usb-ohci #or usb-uhci
# MODULE_02 = printer
# PRINTER_0_DEVICE = /dev/usb/lp0
# PRINTER_0_TYPE = S
all the printers are tied to server processes emulating hp jetdirect. you
can change the default port too. good luck, julius
p.s. my suggestion is to test *everything* on a separate small test setup
> Piotr Giza <[EMAIL PROTECTED]> wrote:
> > 2. Is there support in ltsp for usb printers (like some HP Laser- and
> > Desk- Jets) and if so, how to set things up? I didn't find it in the docs.
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
