When trying to boot from a ROM-image floppy, I get as far as "Searching for server (DHCP) and then dots start printing below very slowly.
I've successfully used a dhcp client to get an ip address for this workstation, so I know the network card, switch, cables are all good. I would assume the dhcp server setup is fine. I'm watching the eth0 port on the server, and i don't see any packets coming from the workstation when i use the rom disk. i've tried a couple different disks for the netgear fa310tx card: the tulip one and the 82c168 one. neither have worked. i've checked the /var/log/messages file and i don't see anything logged when the client work station starts up. any ideas on what could be wrong? or how to debug it further? thanks for you help! Mark ------------------------------------------------------- This SF.NET email is sponsored by: FREE SSL Guide from Thawte are you planning your Web Server Security? Click here to get a FREE Thawte SSL guide and find the answers to all your SSL security issues. http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0026en _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
