The image is OK, and if the burning succeeded, the eprom should be fine. Here we have some rtl8139 nics and they all boot from eprom.
You might have to tell the rtl8139 nic that it has a bootrom that it should use to boot, use the rset8139.exe utility from a dos-prompt. Also in the bios of the pc set the boot device to LAN. regards, Johan Romme -- -- Romme Software Engineering [EMAIL PROTECTED] -- Cornelis Trompstraat 90 06-22982288 -- 2628 RS Delft 015-2855904 On Tue, 2003-01-21 at 09:34, amol ambekar wrote: > plz help > > i have a rtl8139 card (32 pin socket for eprom) > i have a M27c256B eprom chip (28pin) > > i have burned rtl8139.lzrom image on my eprom > but it is not booting > i that correct iamge > do i have to also burn boot1a.bin on the eprom > > plz help me burning on eprom > what exactly i have to burn on eprom > > > > > > ------------------------------------------------------- > This SF.NET email is sponsored by: > SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! > http://www.vasoftware.com > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.freenode.net > ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
