Patrick, I tried both mice with appropriate changes in device as well as protocol but the crash messages are same "No Mouse found" If I run the generated XF86Config.new with "-allowMouseFailOpen" then I get X running on my screen but of course without any mouse!!!
Sudev On Tue, 2003-03-11 at 13:13, Patrick Regnouf wrote: > First of all, what kind of mouse do you have is it a PS/2 (little round > plug) or is it serial? (9 or 25 pins trapezoidal plug). > > if your mouse is PS/2 then modify the XF86Config file so that it reads > > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "PS/2" > Option "Device" "/dev/psaux" > EndSection > > if your mouse is serial, chances are that the following lines will > work: > > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "Microsoft" > Option "Device" "/dev/ttyS0" > EndSection > > the line > > Option "Device" "/dev/ttyS0" > > refers to what would be called under DOS/Windows COM1, if the mouse is > on COM2 then replace ttyS0 by ttyS1 ... > > Good luck > > /Patrick > > > > > > On Tue, 2003-03-11 at 05:52, Sudev Barar wrote: > > I have generated XF86Config.new many times and with different mice. I am > > unable to start X as it always gives > > "(EE) xf86OpenSerial: Cannot open device /dev/mouse > > No such file or directory" > > > > I edited the configuration file that is generated and changes mouse > > definition to /dev/psaux but no luck. I even changed the mouse to serial > > mouse and definition to ttyS0 with now luck. > > > > Now I was thinking of making a link by using > > "ln -sf /dev/ttyS0 /dev/mouse" > > but I find that listing of dev directory shows some sort of link already > > for /dev/ttyS0 to /dev/tts/0 What does this maen? Any harm if I go ahead > > and make link for /dev/mouse on /dev/ttyS0???? > > > > TIA > > Sudev > > > > > > On Thu, 2003-02-27 at 16:15, Patrick Regnouf wrote: > > > Just modify your lts.conf so that LOCAL_APPS=Y, your station will mount > > > the user's home directory via NFS so that you can copy the file there > > > ;-) > > > > > > /Patrick > > > > > > > > > On Thu, 2003-02-27 at 10:02, Sudev Barar wrote: > > > > On Tue, 2003-02-25 at 19:04, Patrick Regnouf wrote: > > > > > you can try to boot up in level 3 and run the following sequence of > > > > > commands > > > > > > > > > > bash# export HOME=/tmp > > > > > bash# /usr/X11R6/bin/XFree86 -configure > > > > > > > > > > you should end up with a workable XF86Config.new in your tmp directory > > > > > then try > > > > > > > > > > bash# /usr/X11R6/bin/XFree86 -xf86config /tmp/XF86Config.new -indirect > > > > > server > > > > > > > > > > if this works, then transfer the newly created XF86Config to you server > > > > > and adjust lts.conf accordingly > > > > > > > > > Lovely, thanks for explaining it so nicely, worked like a charm. Now the > > > > problem is I do not know how to transfer it to my server!!! In bash all > > > > directories are being shown as read only below the "/opt/ltsp/i386/" > > > > directory. And I do not know how to access the server root or any other > > > > directory. Help please. > > > > Sudev Barar ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
