Actually I have a server Athlon XP 1800 256 MB Ram Nvidia Video Card
with Mandrake 9.1 and the test terminal is P120 32 MB ram .
The terminal is ws001and use serial mouse atached to /dev/ttyS0
and if I define in lts.conf this mouse the ternimal not start x and give me an
error : Can 't open serial device /dev/ttyS0
The default config is ps2 and If I use the standard config the terminal startX
ok but without mouse working, if I use the keyboard all works ok, but this
terminal not have ps2 input , why starts ok and If I try with serial mouse
configuration don't start ???
May be I need to modify any other file shuch as modules.devfs and enable ttyS
or something ? or rc.setupx or rc.setupx3 ?
I would Apreciate any help, all this is for a School
in Ramallo Buenos Aires Argentina
thanks in advance
My lts.conf
///////////////////////////////////////////////////////////////////////
#
# Config file for the Linux Terminal Server Project (www.ltsp.org)
#
[Default]
SERVER = 192.168.10.254
XSERVER = auto
X_MOUSE_PROTOCOL = "PS/2"
X_MOUSE_DEVICE = "/dev/psaux"
X_MOUSE_RESOLUTION = 400
X_MOUSE_BUTTONS = 3
USE_XFS = N
LOCAL_APPS = N
RUNLEVEL = 5
#------------------------------------------------------------------------------
#
# Example of specifying X settings for a workstation
#
[ws002]
XSERVER = auto
LOCAL_APPS = N
USE_NFS_SWAP = N
SWAPFILE_SIZE = 48m
RUNLEVEL = 5
[ws001]
XSERVER = auto
# X_MOUSE_PROTOCOL = "Microsoft"
# X_MOUSE_DEVICE = "/dev/ttyS0"
LOCAL_APPS = N
USE_NFS_SWAP = N
SWAPFILE_SIZE = 64m
RUNLEVEL = 5
#
# ws004 is my virtual workstation running in a VMware session
#
[ws004]
DNS_SERVER = 192.168.10.254
XSERVER = auto
X4_BUSID = "PCI:0:15:0"
X_MODE_0 = 800x600
LOCAL_APPS = N
USE_NFS_SWAP = N
SWAPFILE_SIZE = 64m
RUNLEVEL = 5
#------------------------------------------------------------------------------
#
# Example of a workstation configured to load some modules
#
#[ws001]
# MODULE_01 = agpgart.o # This is for i810 video
# MODULE_02 = uart401.o
# MODULE_03 = sb.o io=0x220 irq=5 dma=1
# MODULE_04 = opl3.o
#------------------------------------------------------------------------------
#
# Example of ws001 configured for local apps
#
#[ws001]
# LOCAL_APPS = Y
# LOCAL_WM = Y
# NIS_DOMAIN = ltsp
# NIS_SERVER = 192.168.0.254
#------------------------------------------------------------------------------
#
# Example of a serial printer attached to /dev/ttyS1 on workstation ws001
#
#[ws001]
# PRINTER_0_DEVICE = /dev/ttyS1
# PRINTER_0_TYPE = S # P-Parallel, S-Serial
# PRINTER_0_PORT = 9100 # tcp/ip port: defaults to 9100
# PRINTER_0_SPEED = 9600 # baud rate: defaults to 9600
# PRINTER_0_FLOWCTRL = S # Flow control: S-Software (XON/XOFF),
# # H-Hardware (CTS/RTS)
# PRINTER_0_PARITY = N # Parity: N-None, E-Even, O-Odd
# # (defaults to 'N')
# PRINTER_0_DATABITS = 8 # Databits: 5,6,7,8 (defaults to 8)
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
--
Bruno Luciani
///Linux Mandrake 9.1///
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
