> J. B. Schatz <[EMAIL PROTECTED]> wrote:
>> What might cause a fatal X server error that says "cannot
>> open /var/log/XFree86.0.log"?
>>
>> I�m getting this error when starting up an X Terminal. I�ve installed
>> LTSP - this is my second LTSP installation but it is the first time
>> that I�ve encountered this particular error.
>>
>> BTW the X Terminal boots fine in init level 3, it�s only X that is
>> failing. Everything seems to be configured according to the
>> instructions but obviously something isn�t.
>>
>> I�ve searched for several days for a possible solution without luck.
>> Thanks for any and all ideas.
>>
>>
>>
> make sure that /var is symlink to /tmp/tmp and check that the ramdisk
> forming temp is made a boottime. eventually you might need to add a
> mkdir line to the Xfree script something like 'mkdir /tmp/var/log' --
> Regards
> Ask Holme aka kVanQue
Thanks I will investigate those three issues and report back.
BTW, in addition to the error report which appears on screen, syslog
reports the following:
ws1 init: Switching to runlevel: 3
xingu kdm(1514): Server for display :0 terminated unexpectedly
-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The best
thread debugger on the planet. Designed with thread debugging features
you've never dreamed of, try TotalView 6 free at www.etnus.com.
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
