Saurav, > 1.While loading the workstation, it shows the server add as : > 169.254.177.197 where as my server add in lts.conf is set as > 192.168.0.254 and on issuing 'dhcpd' only i found that it's > listening on eth0 .
Somehow, (as per the end of your post, " ...when typed ifconfig i got one more interface eth0:9 which then showed the server address as 16x.xxx.xxx.xxx ...") you may need to disable this; I'm assuming this is your 'real' IP. Go into your networking setup, and see if there are any alias's - for the purpose of testing, disable these. BTW, it's generally not a good idea to post a real-world IP on groups ;) > This is my lts.conf file > > server_args = -s /tftpboot I think if you look thru the ltsp site, search for 'troubleshooting' or similar. I'm thinking you may need to change that "-s /tftpboot" a bit. Have my test server off, if you like I'll check it for you. /b ------------------------------------------------------- This SF.net email is sponsored by: VM Ware With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here: http://www.vmware.com/wl/offer/345/0 _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
