Hi,
For isc dhcpd V2xx, you need a subnet dec for each network serviced.
You could update to V3 which has many new features or just add the
following for the subnet on eth0:
subnet 192.168.1.0 netmask 255.255.255.0 {
}
Assuming eth0 is a 192.168.1.0/24 network. If not, replace with the
network details.
Hope this helps.
Macky
On Sat, 2003-07-19 at 20:43, [EMAIL PROTECTED] wrote:
> hi
>
> i had install redhat 8 with all pakages i am using ltsp 3.0.8 i had problem
> configureing dhcp with 2 ehternet cards .
> I want to use for internet shareing purpose.
> how do i get older vsion of rom-o-metic like 5.0.1,5.0.2 for my 3com card
> i am trying with floppyed boot
> can i share internet with 1 ethernet card to 10 clients
> when i confiure dhcp it gave errors like no sunbet for eth0 and
> Can't bind to dhcp address: Address already in use i am newbies to ltsp
> pls help
> can i use alternatice to dhcp ? if any pls give dtls
> but i check before confiurering my all serives works fine...dhcp,nfs,tftp,portmap,
> icheck with ps and netstat commands
>
>
>
> thansks
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: VM Ware
> With VMware you can run multiple operating systems on a single machine.
> WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the
> same time. Free trial click here: http://www.vmware.com/wl/offer/345/0
> _____________________________________________________________________
> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help, try #ltsp channel on irc.freenode.net
-------------------------------------------------------
This SF.net email is sponsored by: VM Ware
With VMware you can run multiple operating systems on a single machine.
WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the
same time. Free trial click here: http://www.vmware.com/wl/offer/345/0
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
