Tom, The VIA board supports PXE boot, you need to enable that from the Bios and configure your DHCP to supply the etherboot image for the VIA Rhine Ethernet card.
Note: the VIA systems have some problems finding the DHCP server if you are using Cisco switches. If you face a problem there, you will need to do some configuration changes for your switch. Regards Prakash On Tue, 2003-09-02 at 08:02, Tom Allison wrote: > I found some mention of a boot ROM in the VIA eden motherboards. > I would like to assume that this runs something like PXE or bootpc/ps > protocols, but can't seem to find anything on the Via websites. > > Does anyone here know? -- Prakash Advani <[EMAIL PROTECTED]> Netcore Solutions Pvt. Ltd. ---------------------------------------------------------------- NETCORE SOLUTIONS *** Ph: +91 22 5662 8000 Fax: +91 22 5662 8134 MailServ: Email, IM, Proxy, Firewall, Anti-Virus, LDAP Fleximail: Mail Storage, Management and Relaying http://netcore.co.in Emergic Freedom: Linux-based Thin Client-Thick Server Computing http://www.emergic.com BlogStreet: Top Blogs, Neighborhoods, Search and Utilities http://www.blogstreet.com Rajesh Jain's Weblog on Technology: http://www.emergic.org ---------------------------------------------------------------- ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
