Hi > i suppose your openmosix+ltsp kernel is available at the right place in > /tftpboot/lts and your client has booted on it? yes it is
but when i've done what you wrote my client won't boot i'm getting this openMosix configuration changed: This is openMosix #823 (od 1 configured) oM #823 is on IP addresss 10.0.3.55 omdiscd[331]:Notofied kernel to activated oM openMosix configuration changed: This is openMosix #823 (od 2 configured) oM #823 is on IP addresss 10.0.3.55 (client) oM #925 is on IP addresss 10.0.3.157 (server) starting syslogd syslogd:syslogd: cannot write to remote handle on 10.0.3.157.514 divide error:0000 CPU:0 EIP:0010:[<c019047e>] Not tained EFLAGS: 00010216 ..... Proces oM_infoD (pid:9, stackpage=cff79000) ... <0> Kernel panic: Aiee, killing interrupt handler! ln interupt handler - not syncing and its stops When on server oM is started this shows but when oM is stopped client starts ok. When on server i start oM client hangs. > so you just have to launch openmosix at the end of the boot phase > in the rc.local script > > > when adding nodes dynamycally with LTSP i prefer > using the openmosix autodiscovering daemon omdiscd in order > the nodes reach the cluster... > > you just have to launch /sbin/omdiscd in order a node can > declare itself to the other node by multicast packet... > > A/ in the permanent openmosix nodes you just have to > remove the openmosix.map static file , and > configure the /etc/openmosix/openmosix.config file > to force the omdiscd at boot time > > # Force autodiscovery-daemon to start, even with a valid .map-file > AUTODISC=1 > > if you want to do that dynamycally you can do > setpe -off (stop openmosix) > /sbin/omdiscd (start openmosix with auto dsicovering daemon) > > B/ and in the LTSP client nodes, i just modified the rc.local script > i launch the omdiscd daemon in the rc.local like that: > (the part of theis script have been written by W.Daniau the author of > ltsp+openmosx distribution here http://www.lpmo.edu/~daniau/ltsp-mosix/ > > try to install http://www.lpmo.edu/~daniau/ltsp-mosix/ but what i should instal from there? i have kernel + openMosix patch compiled and i suppose it should work ok I don't kown what i'm doing wrong and why my openmosix client can't join cluster. Thanks and best regards Grzesiek ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
